Supersonic_Air_knifes-Accessories

1.5" Hose

Air hoses (1.5”) for the X-HFA, X-HFD, X-HFL and H-2 VAC are available in 13.5’, 50’ and 100’ lengths. Included in the price of the hose are two 4 prong connectors.

1" Hose

Air hoses (1”) for the X-LT, X-ST2, X-LTL and H-1 VAC are available in 23’, 50’ and 100’ lengths. Included in the price of the hose are two 2 prong connectors.

4" Discharge Hose

The 4" discharge hose which is standard on the air vacuum tool is available for purchase. A replacement hose for the H-1 vacuum tool is 10' and the replacement hose for the H-2 vacuum tool is 20'. One rubber coupling is included with a hose purchase.

Aluminum Dirt Shield

A 14” aluminum dirt shield is available for those who prefer added protection from flying debris. The 14” shield can be attached to the standard dirt shield of any of the air knives.

Travel Case

A travel case (approximately 24” x 15” x 5”) is available for purchase for the following tools provided the split barrel option is used: X-LT, X-ST2 and X-HFA. A small air hose will also fit inside the case.

Variable Nozzle

The supersonic air nozzle (model VN 375) is a variable flow, variable pressure and variable power nozzle designed specifically for the X-HFA. In its fully opened configuration, this variable nozzle has equivalent performance to the standard fixed nozzle; however, the variable nozzle is continuously and simultaneously adjustable, in pressure and flow, in order to simulate the performance of any one of three sequentially smaller nozzles as if they were connected to this size compressor. The purpose of these optional smaller nozzle positions is to readily and conveniently provide the tool operator with selectable settings that are appropriate for lower power tasks within a single project, each of which are Supersonic.