Tools

  1. Home
  2. Products
  3. Tools

These tools are optimized for small compressors

(185 CFM)

X-LT

This is a lightweight air knife digger used for general purposes. It is the preferred model of arborists. For the best operation, 90 psi is the minimum pressure required at the tool. The aluminum barrel comes in two lengths--45.75” and 41”. A split barrel is also available for the travel case option.

  • Material: Aluminum
  • Recommended Compressor: 125 PSI – 185 CFM
  • Weight: 5.5 pounds
  • Model: Light Weight

X-ST2

This is a heavy duty air knife digger preferred by utility workers. For the best operation, 90 psi is the minimum pressure required at the tool. The stainless steel barrel comes in two lengths—46.75” and 41”. A split barrel is also available for the travel case option.

  • Material: BRASS & STAINLESS STEEL
  • Recommended Compressor: 125 PSI – 185 CFM
  • Weight: 12.2 Pounds
  • Model: Heavy Duty

X-LTL

This is the standard air knife digger with liquid injection capability. For the best operation, 90 psi minimum pressure is required at the tool. It uses a standard garden hose connector for the water inlet. The aluminum barrel length is 38”.

  • Material: Aluminum
  • Recommended Compressor: 125 PSI – 185 CFM
  • Weight: 8 Pounds
  • Model: Liquid Injection

H1-VAC

This air vacuum complements the air knife digger by aiding in the removal of the debris loosened by the air knife digger. It comes with 10’ of discharge hose. For good operation of this vacuum, a 50 to 75 psi pressure is required at the tool.

  • Material: Aluminum/Steel
  • Recommended Compressor: 125 PSI – 185 CFM
  • Weight: 16.5 Pounds
  • Includes: One vac and 10' of discharge hose

These tools are optimized for large compressors

(375 CFM)

X-HFA

This is a high volume air knife digger and heavy duty tool. For the best operation, 90 psi minimum pressure is required at the tool. The aluminum barrel is 42.50” in length. A split barrel is also available for the travel case option.

  • Material: Aluminum
  • Recommended Compressor: 125 PSI – 375 CFM
  • Weight: 8.7 Pounds
  • Model: High Volume Digger

X-HFL

This is the high volume air knife digger with liquid injection capacity. For the best operation, 90 psi minimum pressure is required at the tool. It uses a standard garden hose connector for the water inlet. The aluminum barrel is 39” in length.

  • Material: Aluminum
  • Recommended Compressor: 125 PSI – 375 CFM
  • Weight: 14 Pounds
  • Model: High Volume/Liquid Injection

H2-VAC

This air vacuum complements the high volume air knife digger by aiding in the removal of the debris loosened by the air knife digger. It comes with 20’ of discharge hose. For good operation of this vacuum, a 50 to 75 psi pressure is required at the tool.

  • Material: Aluminum/Steel
  • Recommended Compressor: 125 PSI – 375 CFM
  • Weight: 16.5 Pounds
  • Includes: One vac and 20' of discharge hose